bluelogo-colmatch.psd (51K) HOME PRODUCTS ORDER CONTACT US LINKS EVENTS



HOME arrow (2K)PRODUCTS arrow (2K)ACCESSORIES arrow (2K)PHANTOM ACCESSORIES

Matching Accessories for your Phantom.


PythonKit (40K)

Python is here! Designed to fit between your stock barrel and your marker to give you a properly sized control bore. Users will see an increase in consistency and air efficiency with this kit.

Comes with Phantom to Phantom adaptor, modified pump handle and four colour coded sizers (.679/.682/.685/.688) in a compact foam carrying case. See below for pricing.



cci_uc_kit (31K)

We finally have them in stock! The CCI undercocking kits! Machined to compliment the lines of your Phantom, this kit will attach with the included screw in place of your front grip screw. Fully compatible with any configuration. Built from billet aluminum, stocked in Polished Black or Silver. More colours may be available for custom orders, please ask. See below for pricing.



phantom_freak (37K)

Now in stock! Phantom threaded Freak backs and modified pump handles. These will let you run your Freak system on your Phantom. These must be used with either the modified pump handle or the new Undercocking kit. See below for pricing.




Part #

Description

Price

9004

6” Barrel

23.25

9006

11” Barrel

27.50

9007

8” Barrel

23.25

9008

14” Barrel

29.50

9511

Matching trigger shoe

5.25

9610

Detent ring set

7.00

9325

T-stock (adjustable)

57.75

9327

L-stock (13” non-adjustable)

31.50

3093

CCI Dropforward

36.75

9406

Sight Ring

15.75

9200

Coloured acrylic pump handle

31.50

9202

Coloured acrylic pump handle - short

26.25

9011A

Coloured acrylic horizontal feedblock

26.25

9413A

Coloured acrylic feedtube cap

9.50

9475

Air adapter w/gauge (on back)

35.75

3050

Bottomline adaptor for 45 Grip

19.00

9467

Vertical air kit

51.25

9606

Phantom Spring and Seal kit.

$12.00

Undercocking kit

The CCI undercocking kits Machined to compliment the lines of your Phantom, this kit will attach with the included screw in place of your front grip screw. Fully compatible with any configuration. Built from billet aluminum, stocked in Polished Black or Silver. More colours may be available for custom orders, please ask.

$48.00

Freak Back and Modified Pump Handle

Phantom threaded Freak backs and modified pump handles. These will let you run your Freak system on your Phantom. These must be used with either the modified pump handle or the new Undercocking kit.

Kit with back and modified handle: $80.00
Freak back: $55.00
Modified pump handle: $28.50

CCM 86* Frame

This is a Custom 86* grip frame that is made for the CCI Phantom. This is a direct replacement which will bolt right on. The grip comes with custom machined delrin grip panels. This product has been discontinued so get them while they last. The grip is made from solid billet 6061 aluminum. Available in Polished Black or Silver and Dust Black.

Polished: $63.75
Dust: $57.75

Python Barrel Compression System

Designed to fit between your stock barrel and your marker to give you a properly sized control bore. Users will see an increase in consistency and air efficiency with this kit. Comes with Phantom to Phantom adaptor, modified pump handle and four colour coded sizers (.679/.682/.685/.688) in a compact foam carrying case. These must be used with either the modified pump handle or the new Undercocking kit.

$78.00
Limited Quantities!




CCI_acrylic_colors (134K)


Replacement parts for your Phantom.


Newexplodedsoft (21K)


2 9009 Gravity feed breech right hand $34.00
2 9009-CF Gravity feed breech center feed $34.00
2 9009-LF Gravity feed breech left feed $34.00
3 9004 6" Barrel $23.25
3 9006 11" Barrel $27.50
3 9007 8" Barrel $23.25
3 9008 14" Barrel $29.50
4 9069 Hex to slot, Adjusting rod adaptor $0.50
5 9420 Air adaptor $20.00
9 9036 Valve spring $1.10
10 9112 Cup $3.00
11 9111 Seal $0.50
12 9113 Eyelet $0.10
13 9110 Cup seal assembly (10,11,12) $3.50
14 9046 O-ring #12 $0.15
15 9115 Retainer $4.25
16 9103 Power tube $12.75
17 9116 Power tube assembly $20.00
18 9062 Anti-kink hammer assembly $14.00
19 9051 main spring $1.25
20 9052 Tuned port compensator (TPC) $9.50
21 9045 Bolt $6.75
21a 9049 Nylon set screw (10-32x1/8) $0.25
22 9048 Bolt assembly (14,21,21A,20) $16.50
23 9068 Adjusting rod, hex 1/4" $4.00
24 9200 Pump handle $18.00
24 9200C Pump handle - Clear $26.25
24 9202 Pump handle 2.5" $16.00
24 9202C Pump handle 2.5" - Clear $16.00
25 9212 Bolt rod with nut $5.75
26 9311 Front body thumbscrew (8-32) $2.75
27 9300 Frame assembly (lower receiver) $52.50
28 9306 Lock washer (1/4") $0.25
29 9307 Grip screw (1/4-20x3/4") $0.50
30 9304 M16 grip bottom cover $0.50
31 9305 M-16 grip $9.50
32 9316 Rear frame thumbscrew (10-32) $3.00
33 9029 Feed port cover $1.25
34 9070 Adjusting rod (4,23) $4.25
35 9003 Breech - stockclass CF $31.50
- 9014 Breech stockclass with Horizontal feedblock $47.50
36 9011 Horizontal feed block $16.00
36 9011C Horizontal feed block - clear $22.00
37 9013 Screw (8-32x5/8") $0.50
38 9410 Stock housing $7.50
39 9038 Puncture pin assembly (includes #40) $6.50
40 9039 Puncture seal $0.75
41 9416 O-ring 14x2 $0.25
42 9415 Stock puncture adaptor assembly $16.00
43 9416 O-ring (14x2) $0.25
44 9414 10 round feed tube $13.25
44 9015 15 round feed tube $14.25
45 9413 Feed cap assembly (includes Feed gate #45A) $4.25
45 9413C Feed cap assembly (includes Feed gate #45A) - clear $6.50
45A 9024 Ball retainer (SC feed gate) $0.75
46 9458 Vertical adaptor screw (8-32x1/4") $0.50
47 9424 Vertical air adaptor $19.00
48 9434 Compression elbow $7.00
49 9435 Hardline (5/32) $5.25
50 9417 Air adaptor side fitting $20.00
51 9206 Nylon washer $0.25
52 9205 Pump return spring $2.25
53 3045 45 grip frame with wrap-around grips $41.00
54 9441 Compression nut $1.00
55 9442 Compression sleeve $1.00
- 3050 Bottomline adaptor for 45 grip frame $19.00
- 9334 M-16 bottomline mounting block (standard bottomline spacing) $19.00
- 9467 Vertical air kit $51.50
- 9400 Sight rail 2.5" $4.25
- 9405 Sight rail 5" $5.25
- 9606 Spring and seal kit $12.00
- 9406P Sight ring pin $3.50
- 3046 Houge wrap around rubber grips, 45* frame $21.00
- 9042 Drop-out changer valve body $26.25
- 9419 12g Quick changer (bucket changer) $32.00


CCI website



DW-sticker-4.25x0.9-color-4 (8K) Deadly Wind

DW Fibur2 (38K) The Deadlywind Fibur carbon fiber barrels are ultra-lightweight, accurate, and quiet. They are compatible with the Freak(tm) replaceable inserts, so one barrel and a few inserts will do the job of multiple barrels.

Weighing in at an average 46grams (59 grams with insert), the Fibur is 2x to 4x lighter than other replaceable insert barrels.

Unlike other carbon fiber barrels, the Fibur barrel is built with a unique 3 layer construction. 2x2 satin Twill external, uni-direction fibers laid up in a strong multi-vector pattern, and then a super slick "Silkfiber" inside that can be safely swabbed. CNC align-bored segment for the insert area, CNC-ported with 3 rows of straight ports, and then hand-assembled and quality checked-- You can't get any more accurate.
NOW AVAILABLE IN PHANTOM THREADS!


PLEASE NOTE! THIS BARREL WILL ONLY WORK WITH UNDERCOCKING KITS!


Available in 6" (unported), 8" (unported), 10", 12", 14", 16" (+ $20.00)		 $95.00


Back to Top





info@pinnaclepaintballsupply.com All prices in Canadian dollars